Yanhua YH35XX Programmer + Simulator BMW ODO Tutorial

This is a tutorial on how to use Yanhua YH35XX Programmer + Simulator to replace the original 35160WT/35128WT EEPROM for BMW odometer correction. Supports adjusting F chassis with 35128WT eeprom and G chassis VDO odometer. Easy operation without risk. No red dot on the odometer after modification.

Check the video to learn:

Required Accessories

YH35XX Programmer

Original car chip welding plate

Simulator

35160/35128 Compatible Simulator

Step1. Read Original Mileage

① Installation

② Remove the original chip from the odometer and solder it to the 35XX original car chip welding plate.

③ Connect the YH35XX chip clip to the YH35XX programmer.

④ Confirm the position and pin definition of the original car chip welding plate. Tilt the original car chip welding plate at an angle of 45°and install it.

⑤ Insert the YH35XX programmer into the USB interface of a computer.

⑥ Backup Original ODO

Run YH35XX software: My Computer >> 35XX programmer USB driver >> BMW ODO Standard edition. Exe

Check if the mileage readout is the same as the original mileage: Select chip model: 35128 >> Read Data ID: 37710KM.

Click "Save Data File" to save the original car data file to the computer

Step2. Write New Mileage

① Installation

② Take out the original car chip welding plate to replace the simulator.

③ Confirm the position and pin definition of the simulator. Tilt the simulator at an angle of 45°and install it into the corresponding YH35XX chip clip. The compatible analog chip operates similarly.

④ Mileage Adjustment

Click "Load Data File" to check if the mileage is the same as the original mileage: 37710KM.

Write Data ID >> OK

Data write success!

Click "Read Data ID" to check if the data written to the simulator is correct: 37710KM.

Mileage modification >> Enter mileage: 1000KM >> OK

Look at the red prompt below and confirm that you've entered the correct mileage: 1000 km.

Click "Write Data ID".

Data is being written...

Data has been written, click "OK".

Now check if the mileage is the same as the modified value: 1000 km.

Step3. Re-install Odometer to Car

① If the mileage is the same as what you want, cut the handle of the simulator and solder it back to the original car chip position.

② If a compatible version of the simulator is used, solder the end of the wires to the original chip location. Pay attention to the direction of the chip.

③ Install the odometer back on the vehicle to verify if the mileage has been successfully modified.

www.obd2shop.co.uk

Solved: Yanhua Digimaster 3 (1EOF) Not Find Device Issue

Problem: When I was using Yanhua Digimaster 3 to read the 93C66 chip, the msg was "(1EOF) Not find device". It's a 2013 Camry Hybrid. What's the reason? Please guide me.

Solution

The reason why cause issue is because of clamp loose connection.

1. Re-clamp the connection.

2. Or remove the 93C66 chip to solder on the OBP adapter for reading.

The problem can be solved.

www.obd2shop.co.uk

(Fixed) Yanhua Digimaster 3 prompts (1E10) Program device error

Customer Problem: When I use Yanhua Digimaster 3 to adjust the mileage of my 2006 sport range rover, a (1E10) Program device error is displayed, please tell me what to do.

Solution: Digimaster 3 can read mileage normally, but can't adjust because the chip is not soldered well, you can solder it again.

For more technical services of Yanhua Digimaster 3 mileage correction tool, please follow http://blog.obd2shop.co.uk/

Yanhua D3 Adjust Benz G Class 2005 400CDI Mileage by OBD?

Can Yanhua Digimaster 3 support to do Mercedes Benz G Class 2005 400CDI mileage correction by OBD? The answer is yes. At present, this function is for testing by conner only. The formal issuance will be advised later.

Can I open D3 testing authorization? And how?

1. Provide sales Digimaster III SN on device backside;

2. Update to get the function: Management >> Update

Update: Thanks to obd2shop.co.uk, I can test to do Mercedes odometer correction by OBD.

It tells:  "(7F12)  The subfunction is not supported."

That means OBD method is not supported for this model.

Yanhua D3 Added Odometer Adjustment & Airbag Reset New Models

Latest Yanhua Digimaster 3 software version 1.8.2203.30 was released in April, added new car models for odometer adjustment & airbag reset. Including Kia, Hyundai, Nissan, Suzuki, Toyota, etc.

Keep up to date to acquire new Digimaster III mileage correction tool car list.

Click "Yes" to upgrade, green icon to view details.

New added car models for airbag reset

KIA 95910-D1100(add modify mode)

KIA 95910-D1300(add modify mode)

KIA 95910-H2000(add modify mode)

KIA 95910-H2300(add modify mode)

KIA 95910-H3000(add modify mode)

KIA 95910-H7000(add modify mode)

KIA 95910-S4300(add modify mode)

Hyundai 95910-B3200(add modify mode)

Hyundai 95910-D0000(add modify mode)

Hyundai 95910-D0150(add modify mode)

Hyundai 95910-F0200(add modify mode)

Hyundai 95910-F0250(add modify mode)

Hyundai 95910-J4300(add modify mode)

Hyundai 95910-J14400(add modify mode)

New added car model for odometer adjustment:

Hitach digging machine 93C66

Komatsu digging machine 93C66

Nissan bluebird 93C86

Suzuki ignis 25320

Toyota Yaris 93c66

Read also:

Top4 Sellers of Odometer Correction Tool

http://blog.obd2shop.co.uk/top-4-sellers-of-odometer-correction-tool-2020/

Audi A6 2006 2.7D Mileage Correction via Obdstar X300M

Obdstar X300M Tool can successfully do mileage correction for Audi A6 2006 2.7D via OBD. Following I’m gonna show how to do it.

As you can see, the mileage on the dashboard is 181934km.

My Obdstar X300M hardware version: 5.04, software version: 2.00.

Connect X300M with OBD2 port, press

Vehicle >> Cluster calibrate >> AUDI >> AUDI V31.74 >> A6L >> 2004-2008 >> Mileage adjustment

Input the old mileage: 181934km

Input the new mileage: 100000km

Communicating...

Just wait for processing...

Adjustment complete, turn the ignition on again.

Okay, so now you can see, the mileage on the dashboard is 100000km.

Done! Very easy and fast in 3 minutes.

This is how to use Obdstar X300M OBD2 Odometer Correction Tool on Audi A6 2006 2.7D. If you need to do the latest car models, OBDSTAR ODO Master is more recommended.

More Obdstar X300M odometer adjustment tutorial:

Land Rover Discovery 4 2012

http://blog.obd2shop.co.uk/lr-discovery-4-2012-mileage-correction-via-obdstar-x300m/

VW Passat B6 B7 CC

http://blog.obd2shop.co.uk/vw-passat-b6-b7-cc-mileage-adjustment-via-obdstar-x300m/

Hyundai Accent 2018

http://blog.obd2shop.co.uk/hyundai-accent2018-mileage-correction-via-obdstar-x300m/

Mazda 6 2008

http://blog.obd2shop.co.uk/2008-mazda-6-mileage-adjustment-via-obdstar-x300m/

Mercedes E Class W212 2014

http://blog.obd2shop.co.uk/mercedes-e-class-w212-2014-odometer-adjustment-via-obdstar-x300m/

2019 BMW 740i Odometer Correction via Yanhua Digimaster 3, Possible?

The answer is yes. Yanhua Digimaster 3 can support doing odometer correction for the 2019 BMW 710i. It needs to work with MB CAN Filter 18 in 1, YH35XX Programmer&35128 Compatible Chip. Applies to an old-style BMW dashboard with a wake-up button.

It should be noted that Digimaster 3 does NOT support BMW with G chassis. If your BMW was equipped with an LCD ID7 dashboard, which requires adding a filter and replacing the simulator for mileage correction. Details please contact www.OBD2shop.co.uk online service that will help you.

This may help to check BMW chassis & IMMO system:

http://blog.obd2shop.co.uk/xhorse-vvdi-key-tool-plus-yanhua-mini-acdp-program-bmw-2021/

How to do BMW mileage adjustment with Digimaster III?

Disassembly of original 35128WT chip

Read data & write data.

35160/35128 Compatible Chip.

Soldering the simulative chip.

Add 18 in 1CAN Filter.

Insert simulative chip to adjust mileage.

Enter mileage to modify.

Mileage adjustment has been done!

http://blog.obd2shop.co.uk/2019-bmw-740i-odometer-correction-via-yanhua-digimaster-3-possible/